- The Rockwell RK3440K VersaCut is a powerful, multi-functional ultra-compact circular saw which can cut different materials
- The VersaCut features a lightweight, compact, balanced design perfect for everyday cuts
- The Laserguide Indicator provides accurate cuts and the easy to set depth indicator helps for quick and precise depth adjustments
- Powerful 4.0 Amp mini-circular saw cuts a variety of materials including tile
- Slim, ergonomic design is easy to manage and maneuver
- Laser indicator helps align cuts
- Plunge cut indicators show exact position of blade entry
- Easy-to-set depth of cut indicator
The Rockwell Rk3440K Versacut Is A Powerful, Multi-Functional Ultra-Compact Circular Saw Which Can Cut Different Materials Such As Wood, Flooring, Plastic, Ceramic Tiles, Slate, Aluminum And Even Sheet Metal. The Versacut Features A Lightweight, Compact, Balanced Design Perfect For Everyday Cuts, With An Integrated Lock And Switch For Easy, One-Handed Operation. The Laserguide Indicator Provides Accurate Cuts And The Easy To Set Depth Indicator Helps For Quick And Precise Depth Adjustments. 4 Amps With A No Load Speed Of 3500 Prm And Depth Of Cut Is 1-1/16". Kit Contains: , Rk3440K Circular Saw, 1 - Hss Blade, 1 - Carbide Blade, 1 - Diamond Blade, 1 - No-Mar Base Plate, 1 - Vacuum Adapter, 1 - Straight Edge Guide.
By Ed
I bought this hoping it would be a nice alternative to my cicular saw when cutting things 1-inch thick and less. Just used it for the first time on some 3/4" plywood and it did just what I had hoped. I have a few Rockwell tools (JawHorse and Sonicrafter) and all are solid quality tools. This is no exception. You can't cut 2x4s with it, but as long as you realize its limits (designed in), its a great addition to a workshop.
I wish that the ratings would allow me to give this a 4 7/8 star rating because I have 2 comments...
1. I had to put a little bit of duct tape around the vacuum attachment because my vacuum's end was a bit bigger (1/16") than the attachment's outer diameter. To be fair to Rockwell, I don't know if this is the fault of my vacuum or the Versacut.
2. As much as I like the "plunge" design, it would be nice if this had a convenient means of locking down the blade to not require the "plunge".
Neither of these issues were serious enough for me to even drop my star rating to 4.5. I'd recommend this to a friend without a doubt.
One other thing... the last two tools I bought from Rockwell were in strong tool-bags rather than the typical molded plastic boxes. I love this! Much more useful 'cause I can throw other handtools in the bag as needed.
I wish that the ratings would allow me to give this a 4 7/8 star rating because I have 2 comments...
1. I had to put a little bit of duct tape around the vacuum attachment because my vacuum's end was a bit bigger (1/16") than the attachment's outer diameter. To be fair to Rockwell, I don't know if this is the fault of my vacuum or the Versacut.
2. As much as I like the "plunge" design, it would be nice if this had a convenient means of locking down the blade to not require the "plunge".
Neither of these issues were serious enough for me to even drop my star rating to 4.5. I'd recommend this to a friend without a doubt.
One other thing... the last two tools I bought from Rockwell were in strong tool-bags rather than the typical molded plastic boxes. I love this! Much more useful 'cause I can throw other handtools in the bag as needed.
By DancersMom
Amazing tool, makes apparently complicated cuts a breeze for a first-timer. Plunge cuts (which I only learned about days before receiving the VersaCut) a simple, clean task. Highly recommended for limited residential remodel and/or install prep work, which will save you $$ on contractors/pros. The laser guide is dead-on and makes following your mark very easy. Tips: (1) For plunge cuts, be sure to get the blade up to full speed--pressing the trigger--before touching the wood, (2) remember that the VersaCut will not start cutting until you press the face plate down onto/into the surface to be cut (make sure you set the depth correctly--for plunge cuts, consider setting for the max of 1 1/16"), (3) for clean exit from a plunge cut, carefully pull straight out of the cut while the blade is still spinning--if you stop the blade while still in the cut, you might get a jump causing a uncontrolled cut--that's the only time I experienced a jump, and that was my fault. If you'd like more info or encouragement, read on. I had never before held a circular saw, mini or otherwise. But after watching a few how-to videos online, I was able to very cleanly and expertly (I think) widen a cabinet cutout (vertical cabinet opening) to replace both a microwave oven and a thermal oven in my home. The old unit had been a combo microwave and oven with only a 24inch wide opening that's not enough to install newer separate units. Pictures are attached showing the Microwave and Oven Cutout after removing the old units and before the VersaCut, then after the VersaCut helped me widen the cutout, and then the final result. Within days after that success (in my view), I used the VersaCut to widen a horizontal laminate countertop cutout (opening) to replace my old coil cooktop. The VersaCut made it soooo easy--I made only one laminate nick, and that was my fault for not pulling out of the cut more carefully. Luckily the small slice ultimately remained under the cooktop surface and is not apparent. The VersaCut cost around $99 and saved me hundreds in handyman or contractor costs! Second Tip for newbies: Follow the old saying: Measure Twice (and check again), Then Cut (correctly) Once. Plan your project, and work the Plan. You can do this!
By KenBee
I have had this saw for 2 months now and the more I use it the better I like it. Actually it has become my go to saw leaving my PC 7-1/4 inch circular saw to collect dust.
The first thing I did was to disable the plunge action and make the shoe adjustable and lockable for the depth of cut. From my experience the plunge action is a kickback waiting to happen and could result in an injury to yourself or the wood being cut. I don't use wood over 3/4 inch thick and so far the saw has performed very well in all kinds of wood, hard and soft.
As far as the laser is concerned it is a no brainer, I just don't use the laser on any of my tools that are installed on the tool. You can't see the last inch or so of the cut anyhow so what good is it? I built an edge guide for the VersaCut, circular saw and router thereby giving me perfectly straight cuts in about any angle I need.
Two of the reviews for the VersaCut I honestly can't agree with. One had to do with tear out which is common with any saw. There are a couple of ways to prevent tear out, one is to score the cut line with a knife or tape the cut line with masking tape. My edge guide eliminates tear out because the blade rides flush with the guide edge. The other concern was the danger of the VersaCut but I fail to see where there is any more danger with the VersaCut than any other tool in your shop if not given the proper respect. My hand is very small but it wraps around the saw and enables me to grasp the saw very well while pulling the trigger. It has plenty of power and the design is very much like a worm saw inasmuch as the blade is not offset like a circular saw keeping it very well balanced. The only potential danger I can see is the plunge action as stated above. I would consider my circular saw much more dangerous than the VersaCut because of its size, weight and it being off balance due to the design.
Having a very small shop as I do the Rockwell VersaCut and Rockwell BladeRunner gives me everything I need to saw wood for my boxes and clocks. Both of them have their limitations and if you don't respect the limitations you are naturally going to consider them unacceptable.
So after all is said and done all tools have their limitations and common sense prevails in their use.
The first thing I did was to disable the plunge action and make the shoe adjustable and lockable for the depth of cut. From my experience the plunge action is a kickback waiting to happen and could result in an injury to yourself or the wood being cut. I don't use wood over 3/4 inch thick and so far the saw has performed very well in all kinds of wood, hard and soft.
As far as the laser is concerned it is a no brainer, I just don't use the laser on any of my tools that are installed on the tool. You can't see the last inch or so of the cut anyhow so what good is it? I built an edge guide for the VersaCut, circular saw and router thereby giving me perfectly straight cuts in about any angle I need.
Two of the reviews for the VersaCut I honestly can't agree with. One had to do with tear out which is common with any saw. There are a couple of ways to prevent tear out, one is to score the cut line with a knife or tape the cut line with masking tape. My edge guide eliminates tear out because the blade rides flush with the guide edge. The other concern was the danger of the VersaCut but I fail to see where there is any more danger with the VersaCut than any other tool in your shop if not given the proper respect. My hand is very small but it wraps around the saw and enables me to grasp the saw very well while pulling the trigger. It has plenty of power and the design is very much like a worm saw inasmuch as the blade is not offset like a circular saw keeping it very well balanced. The only potential danger I can see is the plunge action as stated above. I would consider my circular saw much more dangerous than the VersaCut because of its size, weight and it being off balance due to the design.
Having a very small shop as I do the Rockwell VersaCut and Rockwell BladeRunner gives me everything I need to saw wood for my boxes and clocks. Both of them have their limitations and if you don't respect the limitations you are naturally going to consider them unacceptable.
So after all is said and done all tools have their limitations and common sense prevails in their use.
By K. Govocek
I borrowed my father in laws to cut cement pavers, and it was great! I have carpal tunnel issues, the versacut is light weight enough that I can use it one handed without problems! The depth isn't great, but it's easy enough to flip the paver over to make the second pass. I'll be getting one of my own!
By The Other Guy
Well I must say a little about my credentials before I go on...actually I have none, but I love this saw...Rockwell RK3440K VersaCut Circular Saw 4.0 Amp
I am a Woodworking hobbyist and so far my largest projects were furniture for my shop. I have 9 or 10 different types of saws that I use for cutting lumber of different types and sizes, MDF, metal and plywood. In anycase where possible I use the VersaCut. It is the only saw I have where the laser guide (right out of the box) was right in line with my cut marks. It could be a circular saw replacement for many. The advertising tells you just about everything you need to know about the saw. Its maximum depth of cut is 1-1/16" which creates a little challange in order cut a 2X4, but its not a show stopper. The price includes three blades (wood,metal & tile) a really robust edge guide, a vacuum port (fits my Metro Vac perfectly),a carry bag and user guide and the tools necessary to change the blade. I'm not sure where Rockwell tools have been all my life but they make a real thoughtfully designed saw. I recommend it... (I'd let my wife use it)
I am a Woodworking hobbyist and so far my largest projects were furniture for my shop. I have 9 or 10 different types of saws that I use for cutting lumber of different types and sizes, MDF, metal and plywood. In anycase where possible I use the VersaCut. It is the only saw I have where the laser guide (right out of the box) was right in line with my cut marks. It could be a circular saw replacement for many. The advertising tells you just about everything you need to know about the saw. Its maximum depth of cut is 1-1/16" which creates a little challange in order cut a 2X4, but its not a show stopper. The price includes three blades (wood,metal & tile) a really robust edge guide, a vacuum port (fits my Metro Vac perfectly),a carry bag and user guide and the tools necessary to change the blade. I'm not sure where Rockwell tools have been all my life but they make a real thoughtfully designed saw. I recommend it... (I'd let my wife use it)
By James E. Thompson
In the three days between my placing this saw onto my wish list and my coming back to place the order, the price jumped $13 to the same price as at my local Lowe's AND it was no longer _Prime_ delivery. So I bought it at Lowe's O:-) Absolutely great saw! Perfectly clean cuts. AND, despite some complaints about the grip, it is a perfect fit to my small hand. Love it!
Added comments: I agree with the comments about the spring-loaded guard being a nuisance. I started out with the saw as-is, and used a Kreg SquareCut guide, ending up having to struggle holding both the guide in place and pushing down against the spring-loaded guard. Finally clamped the Kreg guide down.
Then I wised up, bought the eemerson 24" clamp, and added a 5/16" carriage bolt, washer and nut to hold the saw guard up... see photo.
No more problems... except for perhaps the possibility of a visit from the nanny-state police ;-)
Added comments: I agree with the comments about the spring-loaded guard being a nuisance. I started out with the saw as-is, and used a Kreg SquareCut guide, ending up having to struggle holding both the guide in place and pushing down against the spring-loaded guard. Finally clamped the Kreg guide down.
Then I wised up, bought the eemerson 24" clamp, and added a 5/16" carriage bolt, washer and nut to hold the saw guard up... see photo.
No more problems... except for perhaps the possibility of a visit from the nanny-state police ;-)
By Jason Pelzer
This is a great little tool, the spring does seem a bit stiff though. I'll be cutting some cement-board with it soon.
Definitely order this from Amazon directly (currently out of stock, but wait for it). "The Tool Nut" says they have it in stock, but they're just pulling your leg to try to get you to backorder with them. It'll be the same price/cheaper on Amazon, and they'll probably have it back in stock sooner (and be honest about their stock levels)
Definitely order this from Amazon directly (currently out of stock, but wait for it). "The Tool Nut" says they have it in stock, but they're just pulling your leg to try to get you to backorder with them. It'll be the same price/cheaper on Amazon, and they'll probably have it back in stock sooner (and be honest about their stock levels)
By K. Ingram
Great tool for your workshop. I have used this for everything from cutting drywall to cabinet making to removing subfloor.
This comes with the saw, a couple of hex keys for blade changes, and 3 different blades, all in a tool bag. Everything you need to get started right away. The laser is accurate and the tool cuts clean. The small blade and grip design make it very easy to handle. This has become my default tool for any type of panel cutting.
One thing I wasn't aware of, but turns out to be one of my favorite features, is that it is basically a plunge saw. The shoe is spring loaded so that if you aren't actively pushing down on the saw, the blade is up inside the guard. The depth stop then restricts how far down you can push the blade. This is much easier to handle on plunge cuts, like for cutting out sub-floor sections, than tilting up a traditional circular saw. It is a fairly heavy spring, but once you get used to it, its not an issue.
Pro's
* Very easy to set up an use. The depth adjustment is just a little plastic cam switch with guide markings etched into the metal.
* The shoe has a plastic cover for using on any type of semi-finished surface so you don't scratch or mark it up.
* The shoe also has markings showing where the cut will start and stop for typical blade depths, taking away guess work and basically eliminating over cuts
Con's
* Dust handling isn't all that great. Even with a shop vac attached, there was drywall dust everywhere when I was finished
I have many different brands of tools in my workshop, including several Rockwell tools. This tool has very high build quality and feels very solid in my hand. Even the tool bag is tough. Rockwell makes good tools, and this is probably the one I use the most.
This comes with the saw, a couple of hex keys for blade changes, and 3 different blades, all in a tool bag. Everything you need to get started right away. The laser is accurate and the tool cuts clean. The small blade and grip design make it very easy to handle. This has become my default tool for any type of panel cutting.
One thing I wasn't aware of, but turns out to be one of my favorite features, is that it is basically a plunge saw. The shoe is spring loaded so that if you aren't actively pushing down on the saw, the blade is up inside the guard. The depth stop then restricts how far down you can push the blade. This is much easier to handle on plunge cuts, like for cutting out sub-floor sections, than tilting up a traditional circular saw. It is a fairly heavy spring, but once you get used to it, its not an issue.
Pro's
* Very easy to set up an use. The depth adjustment is just a little plastic cam switch with guide markings etched into the metal.
* The shoe has a plastic cover for using on any type of semi-finished surface so you don't scratch or mark it up.
* The shoe also has markings showing where the cut will start and stop for typical blade depths, taking away guess work and basically eliminating over cuts
Con's
* Dust handling isn't all that great. Even with a shop vac attached, there was drywall dust everywhere when I was finished
I have many different brands of tools in my workshop, including several Rockwell tools. This tool has very high build quality and feels very solid in my hand. Even the tool bag is tough. Rockwell makes good tools, and this is probably the one I use the most.
By D. A. Morehouse
Have been using this tool for over 1 year before rating it. Had shopped around for something like this well before all manufacturers started making these. Yes, I saw the infommercial and "had to have it"! As a general contractor I use all sorts of tools for many different jobs. This one is great for minor trim work, making cuts in tiles when a repairing/replacing tiles. I bought replacement blades when purchased figuring having them on hand. But haven't need them yet. I don't use it as much as my larger tools, but do use it a lot.
It comes with an attachment to hook up to your vacuum. I use it all the time we are in clients homes, until one day it BROKE! And it broke where it fits into the saws' housing. I called the company, and whilst thats a "wear-and-tear" part not under warranty they said I'd have to pay for a new one. The piece was around $1, so I said send me 2, and I asked rep on the phone "so how much is shipping, like $8"? She said, no shipping cost. The discussion was very friendly and she was very understanding.
I have dealt with Rockwell reps on the phone before (I also own a Jawhorse - excellent product) and have met them at tool and trade shows. Good company, nice employees, and they do make good pro-quaity products.
It comes with an attachment to hook up to your vacuum. I use it all the time we are in clients homes, until one day it BROKE! And it broke where it fits into the saws' housing. I called the company, and whilst thats a "wear-and-tear" part not under warranty they said I'd have to pay for a new one. The piece was around $1, so I said send me 2, and I asked rep on the phone "so how much is shipping, like $8"? She said, no shipping cost. The discussion was very friendly and she was very understanding.
I have dealt with Rockwell reps on the phone before (I also own a Jawhorse - excellent product) and have met them at tool and trade shows. Good company, nice employees, and they do make good pro-quaity products.
By Alex
CASE IN POINT: Last month I put this tool to a real test. I demoed a bathroom, ripped out the subfloor and installed new ¾ OSB + ½ ply. Then ½" backer board. Then PEI IV 12x12 tile. The table saw, circ saw, and tile saw stayed in the garage. I did the entire job with this tool, had fun, saved time and frustration. It can't get any better than that.
CASE: This is a big deal to me. This case has rigid cloth and burley zippers, with a solid handle. It's the right size seems really tough. It has two zippered sections for accessories.
FEEL/DESIGN: The tool This is bigger and heavier than you might expect from infomercials and online pics. It feels very solid in your hands. Although heavy it is well balanced and comfortable. Most of the body is plastic (of the sturdy sort, which i'm fine with frankly). It's easy to grip and the "rubbery" plastic is used in the right places for good grip. Buttons are easy/intuitive to find and use. Loading a blade is fast, easy, and intuitive.
The depth setting is the tool's only drawback. If you are cutting on top of a stack or on top of other materials, then getting the depth correct is important, and it's a little tough. The gauge itself is very small, and as you tighten it down the setting actually moves. You'll learn how to finesse it to where you want after some practice. Also, after you do a few cuts you'll notice the depth setting is moving deeper and deeper. Not good but not a show stopper. For this reason, when possible I don't cut on top of other materials. Just keep in mind that if your materials underneath will probably be scuffed/marred. Usually that's OK (what's underneath is not something exposed as an end product, it's subfloor, backer board, etc.)
This is not a tool for building cabinets, but its accuracy is more than good enough for cuts it is designed for. Probably good enough for some it's not designed for.
POWER: Blade spins up almost instantly and the tool does a pretty good job keeping up with what it's cutting. Don't expect this to plow through materials like your 18amp worm drive circ saw, or your 10A wet tile saw. It won't. This is 4 amps. If it were more powerful it would be too big and hot. If it were smaller it wouldn't be powerful enough. This tool is powerful enough to cut any material in a reasonable amount of time (it actually flies through wood), and small enough to be very versatile. I say Rockwell got the power/size balance correct.
NOISE: Tool is surprisingly quiet. Really, the noise from the blade cutting material is far louder then the tool itself.
DUST COLLECTION: Without a vac attached, even when cutting tile, the dust is pretty manageable. It does not kick all up in the air, but mostly accumulates in a pile. With a vac attached there is virtually no dust anywhere
CEMENT BACKERBOARD (hardibacker): WOW. Tool is worth purchasing just for this. This is the absolute best way I've ever seen for cutting this stuff. I've struggled with the score-and-snap method, with dry tile saws, rotary tools, handsaws.... and now FINALLY this tool comes along. Cuts fast and straight with minimal dust.
TILE: Cuts through tile surprisingly quickly. I wouldn't use this to do a hotel lobby, but definitely would bring this out to do a smaller residential bathroom floor. You get through a 12x12 pei IV tile in about 15 seconds.
WOOD: Flies through wood. Tool is also worth buying just for cutting plywood. I cut 4'x8' sheets down to manageable sizes with this tool, then depending on the job finish up with the table saw. If you cut plywood and don't have a panel saw then you need this. I 100% prefer this to a circ saw. A little slower, but more accurate (with track accessory), quieter, less dust, less fatigue. Plunge cuts are easy a feel pretty safe.
METAL: I so far have only cut through ducts with this, but it does great. Similar performance to a handheld angle grinder, but requires a bit more pressure.
All in all, it's a fantastic versatile tool.
CASE: This is a big deal to me. This case has rigid cloth and burley zippers, with a solid handle. It's the right size seems really tough. It has two zippered sections for accessories.
FEEL/DESIGN: The tool This is bigger and heavier than you might expect from infomercials and online pics. It feels very solid in your hands. Although heavy it is well balanced and comfortable. Most of the body is plastic (of the sturdy sort, which i'm fine with frankly). It's easy to grip and the "rubbery" plastic is used in the right places for good grip. Buttons are easy/intuitive to find and use. Loading a blade is fast, easy, and intuitive.
The depth setting is the tool's only drawback. If you are cutting on top of a stack or on top of other materials, then getting the depth correct is important, and it's a little tough. The gauge itself is very small, and as you tighten it down the setting actually moves. You'll learn how to finesse it to where you want after some practice. Also, after you do a few cuts you'll notice the depth setting is moving deeper and deeper. Not good but not a show stopper. For this reason, when possible I don't cut on top of other materials. Just keep in mind that if your materials underneath will probably be scuffed/marred. Usually that's OK (what's underneath is not something exposed as an end product, it's subfloor, backer board, etc.)
This is not a tool for building cabinets, but its accuracy is more than good enough for cuts it is designed for. Probably good enough for some it's not designed for.
POWER: Blade spins up almost instantly and the tool does a pretty good job keeping up with what it's cutting. Don't expect this to plow through materials like your 18amp worm drive circ saw, or your 10A wet tile saw. It won't. This is 4 amps. If it were more powerful it would be too big and hot. If it were smaller it wouldn't be powerful enough. This tool is powerful enough to cut any material in a reasonable amount of time (it actually flies through wood), and small enough to be very versatile. I say Rockwell got the power/size balance correct.
NOISE: Tool is surprisingly quiet. Really, the noise from the blade cutting material is far louder then the tool itself.
DUST COLLECTION: Without a vac attached, even when cutting tile, the dust is pretty manageable. It does not kick all up in the air, but mostly accumulates in a pile. With a vac attached there is virtually no dust anywhere
CEMENT BACKERBOARD (hardibacker): WOW. Tool is worth purchasing just for this. This is the absolute best way I've ever seen for cutting this stuff. I've struggled with the score-and-snap method, with dry tile saws, rotary tools, handsaws.... and now FINALLY this tool comes along. Cuts fast and straight with minimal dust.
TILE: Cuts through tile surprisingly quickly. I wouldn't use this to do a hotel lobby, but definitely would bring this out to do a smaller residential bathroom floor. You get through a 12x12 pei IV tile in about 15 seconds.
WOOD: Flies through wood. Tool is also worth buying just for cutting plywood. I cut 4'x8' sheets down to manageable sizes with this tool, then depending on the job finish up with the table saw. If you cut plywood and don't have a panel saw then you need this. I 100% prefer this to a circ saw. A little slower, but more accurate (with track accessory), quieter, less dust, less fatigue. Plunge cuts are easy a feel pretty safe.
METAL: I so far have only cut through ducts with this, but it does great. Similar performance to a handheld angle grinder, but requires a bit more pressure.
All in all, it's a fantastic versatile tool.
Comments
Post a Comment