Skip to main content

Leatherman 934810 Leatherman Wave Nylon Sheath

  • Leatherman Wave sheath
  • Three pockets and slots for accessories and permits holstering of tool in open position
  • Vertical and horizontal carry
  • Premium nylon
  • Leatherman's 25-year limited warranty
The Leatherman Premium Nylon Sheath is designed exclusively for the Leatherman Wave models. This premium sheath features three pockets/slots for accessories. It even permits holstering the Wave in the open pliers position and allows for vertical and horizontal carrying. It comes with Leatherman's 25 year limited warranty.

                                       Image result for amazon buy now
Image result for customer review
By Andres Agredo
I get this to keep the Leatherman Wave Knife/multi-tool with me all time when I am working.
I read almost all the reviews and I was concern if it will fit on my belt, It is ok,
the space for the belt is 2" 1/4, more that enough for a regular belt in my opinion.

I like it have 5 "pockets", you ca put no only the multitool, also you could (in my case):
-2 sets of bit drivers, (Leatherman 931014 40-Bit Assortment for Leatherman Bit Drivers) (purchased separately)
-1 small flashlight, (Fenix Compact LED Flashlight) (purchased separately)
-1 small Sharpie pen, and (purchased separately)
-1 SD card or coin (if you want too) (purchased separately)

I am uploading some pictures for a better idea.

I use it everyday, so it is really a good product at a great price.
give it a chance!, and let me know if you like it and if the pictures/review help you to decide.
review image review image review image review image

By szki272
It fits the leatherman wingman as well. I wasn't sure when I ordered. The tool is securely held but easily removed.

By Todd Guthrie
I received a Skeletool for Christmas (which is a wonderful tool, by the way) and needed a sheath to store it in - this one is absolutely perfect. I ended up ordering the set of extra bits for the Skeletool, and the best part of this sheath is that 1 card of bits, as well as the tool, fit easily inside. I put all my most used bits on 1 card, and now I have a very handy tool - really, it is almost a pocket-sized tool kit. Incredibly useful around computers, as the bits aren't magnetic...

By Leo Kim
I bought this sheath to carry the Wave or Charge TTI, and I have to say that I like this one much better than the ones that came with either multi-tool. It is tough and durable, and the several compartments found on the sheath are pretty useful.

I have a bit driver extender for the Wave/Charge TTI, and this sheath has compartments on either side that hold it better than my other sheaths. On this sheath, it grips and holds my bit driver extender more tightly and securely so that I don't have to worry about it falling out.

Like my other sheaths, it also allows for "holstering" of your Wave/Charge TTI in the open position via the round hole at the bottom of the sheath. I'm glad I made this purchase for my Wave/Charge TTI. I have no complaints here, even after wearing it daily since I bought it back in April. So far, so good. It's been holding up just fine thus far.

By Scott Mortenson
For anyone that uses their Wave all the time, Nylon with Velcro is the best & most practical solution. My first sheath was Nylon and after a long, hard use the stitching on the belt loop broke, so I decided to try leather. Leather doesn't dry quickly & the snap can break (as my last one did). So I'm happily back to Nylon/Velcro.

Everything I love and therefore use alot wears out. My favorite jeans wear out, at some point my Wave will wear out and so does Nylon/Velcro. Because the pricing at Amazon is so reasonable I buy 2. One goes on my belt and the other on the shelf. When the one on the shelf gets moved to my belt I order 2 more.

By NVM
Great sheath. I use it every day. I have the wave with the bit set and the bit extension. Has slots to hold them all. Also I have a mini adjustable wrench on the other side. There is nothing I can't take apart with this setup. Case is rugged and sturdy and holds everything nice and snug. Some have complained about the Velcro. I open and close the flap probably 10 times a day for months now and have had no issue.

By Amazon Customer
This sheath fits my Charge perfectly. I also ordered the extra bits so I could fit the most useful of those in the slot provided. I do not understand the negative remarks about velcro. I have many other tool cases and clothing with velcro and only had one instance where the fabric side became shredded and would not hold. I have carried this for several weeks and made it a point to try and wear out the velcro. I can see no deterioration in holding power and expect this sleeve will last many years of normal use. I was also able to thread this sleeve on my belt with no trouble using the horizontal or vertical loops provided. The horizontal loops will accept a belt 1-1/2" wide. The vertical loop will work on a belt 2" wide. Removing the tool does make threading the sleeve on a belt easier.

By WildFire
As described, but the high quality construct wasnt mentioned. Nor was the compatibility of my particular leatherman (super tool 200) yet I gambled and can say that it fits excellently. The packaging was brand new-esque and came shipped safely popcorned and boxed. The price simply cannot be beat for the quality you will recieve!

By Bob Dobbs
This was a good replacement for the leather pouch supplied with my "classic" model Leatherman multitool. I went through two of the leather pouches. They wore out because they were always catching on things due to their square shape, and the bottom rubbing against chair arms etc.

This case is lower-profile, so it won't snag as much. It has side pockets for extra tools or a miniature flashlight & spare battery.

It is not an exact fit for my Leatherman classic multitool, but that doesn't matter. I don't feel the tool rattling around inside, which I often did even with the closer-fitting leather case.

I find that the hook & loop fastener on this case holds on better than did the snap on the original leather case. Again, because this case doesn't snag on things, I have yet to have it accidentally pulled open. The snap on the old case would sometimes catch on things & then my multitool would fall out.

Overall, this case is vastly superior to the original leather case.

By Chris R. Madison
I purchased this as a replacement for my Leatherman Supertool 200 and flashlight. The Combo Sheath I had is no longer available. The Wave Nylon Sheath is a great replacement. The Supertool 200 fits very nicely and it has a side hoop part that fits very snuggly around the flashlight. This is an awesome replacement. The supertool was a little loose. I asked my mother to fix, she was able to sew the extra space closed so it now fits nicely.
review image

                                              

Comments

Popular posts from this blog

Milwaukee 6519-31 12 Amp Sawzall Reciprocating Saw Kit

Powerful 12-amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials 1-1/8-inch stroke length provides maximum cutting speed Gear protecting clutch extends gear and motor life by absorbing high-impact forces caused by blade lock-ups Counter-weighted mechanism provides reduced vibration for smoother operation QUIK-LOK blade clamp provides fast, tool-free blade changes The 6519-31 Sawzall Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8-Inch stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics. Note that product package does not include blade. Blades are sold separately.         ...

Milwaukee 48-00-1303 Sawzall Blade Wood 5 Teeth per Inch 12-Inch Length, 5 Pieces in 1 Pack

The product is easy to use The product is durable The product is manufactured in Switzerland 5 TPI, 12 in. Length, High Carbon Steel Construction 1/2 in. Universal Tang fits all Sawzalls Milwaukee's Pruning Blades are made of high carbon steel for flexibility. The deep gulleted teeth are fleam ground for aggressive cutting action in green wood. Sold in packs of 5.                                       By Larry Loo Before purchasing this package of Sawzall blades, I was a little concerned that the blades might not last too long in our hands. After all, my wife and I have gone through close to a dozen hand-held pruning saws during the 20+ years we've lived on our property. Those pruning saws always cut well when new but seem to get dull very quickly. With their close set, needle-like teeth they're also difficult to sharpen - and I've sharpened regular saws using saw sets and files. Eac...

Stanley Tr110 Heavy Duty Steel Stapler

Perfect For Everyday Stapling Needs Around The Home Or Office Lightweight, With Convenient Handle Lock For Safe Storage Quick-Jam Clear Mechanism Saves Time And Hassle Perfect For Everyday Stapling Needs Around The Home Or Office. Lightweight, With Convenient Handle Lock For Safe Storage. QuickJam Clear Mechanism Saves Time And Hassle. ChromePlated Steel Construction For Durability.                                      By Tech Geek Reviews Quality stapler! I use it for securing leather upholstery into wooden furniture, which can be a tough job for staple guns. I use the stanley heavy duty staplesStanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000 It does everything you want a stapler to do: -No jams in the stapler (could be the staples too, I recommend the above ones which makes a well matched pair) -A little tricky to reload the first time, but after you get some practice, ...