Skip to main content

Maglite Black Universal Mounting Brackets for D-Cell Flashlight, 2 pk

  • Specially designed brackets conveniently store D-cell flashlights
  • Package includes 2 brackets for added affordability
  • Mount just about any surface
  • Includes mounting screws
  • Crafted from heavy duty ABS plastic
The MAGLITE flashlight mounting bracket provides a convenient place to store D-cell flashlights. No more grappling in the dark when the lights go out; you'll know exactly where to find the flashlight in the event of a power outage. The brackets are constructed of heavy-duty ABS plastic and mount to just about any surface.

                                    Image result for amazon buy now
Image result for customer review
By rachelncross
We have some movie quality light sabers that needed to be mounted in our movie room. I couldn't figure out how to mount them, until now. The D-cell Maglite holders are perfect. We wound up using longer screws since we needed to get to the wood behind our dry wall(so that we could remove the sabers when needed without loosening the install). So for anyone looking for a quick fix mount that looks good for your light sabers, look no further.
review image

By S. Pandya
The price at Amazon makes it a no-brainer purchase to go along with your Maglite. I've installed three of these around the house. After six months of active use, I have not observed any signs of cracking or yielding in the plastic.

A few reviewers have mentioned that they have managed to break a few of these, and this might be caused by improper installation. It is imperative that, when using two clips for a flashlight, that they are perfectly aligned. If they are out of line by even a few millimeters they will require much more force to place and remove the flashlight. Alternatively, using just one clip for at least the 3 cell lights seems to work just fine as well.

Overall, I am satisfied with this product and consider it to be a good value at the advertised price.

By Dest
Holds my maglite very securely in my Jeep, takes a bit of strength to get it out but I'd rather have it tight than loose. So far haven't experienced any problems and I've had it holding for a couple of months now.

By hard to please
It is a tight hold and I slide it out through the top and then slide it back down to put it away. Although you can simply pull it out and then push it back in. It's great to have a permanent spot for a flashlight. You always know where one is.
I have one MAGLITE S3D036 Heavy-Duty 3-D attached to the wall in my laundry room/mud room (leads outside) and in my garage. attached by
MAGLITE ASXD026 D-Cell Flashlight Mounting...
review image review image review image

By Jason Barnes
Mag Lite products are the industry standard for a reason. They are American Made. They are Union Made. They are the quality that you need to last you a lifetime. I recommend!
review image

By soy
These were recommended to me by a fellow user on reddit. It's perfect to use for the Force FX lightsabers. I used the clips to hang by Kylo Ren lightsaber onto the wall. Installation was simple.

Here's a pic:
 
By zxthunder
I mounted these to my Ram 1500 and it works amazing. The maglite doesn't rattle or move even in sharp corners.

I've used these in my past 4 vehicles and they work like intended! Since the photo I've added weathertech mats underneath the mounts and they're lined up just perfect. It looks like these brackets were made for the truck.
review image

By M. Hadden
The mounts are a must have to properly secure your Maglite in a car or wherever you might keep your light. I specifically stated car because a lot of people, including friends of mine, simply slide them in between the seat brackets and the center console. It may work great, but in an accident, it'll become a heavy missile. Not to mention keep it in the place you expect it to be and not rolling around. I have a set of these in my car and a set on my bedside for another Maglite.

By R. Beach
I was hesitant to buy this, and with a 3 D-cell flashlight being as heavy as it is. I mounted this to the wall, making sure it was attached to the studs in the wall. There are made of palstic (very strong). It has excellent retention properties. It actually holds the flashlight so tight that you feel as though the plastic mount would break (it doesn't). I bought 4 sets of these, and do not regret it.

By JG
these mag light brackets work great I mounted it on the wall now I can always find my mag light no more looking for it only needed to used one bracket. there made of plastic not sure how long they will last but for the money there are worth it. there is not much more I can say about them shipped and received on time would buy again.

                                              

Comments

Post a Comment

Popular posts from this blog

Milwaukee 6519-31 12 Amp Sawzall Reciprocating Saw Kit

Powerful 12-amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials 1-1/8-inch stroke length provides maximum cutting speed Gear protecting clutch extends gear and motor life by absorbing high-impact forces caused by blade lock-ups Counter-weighted mechanism provides reduced vibration for smoother operation QUIK-LOK blade clamp provides fast, tool-free blade changes The 6519-31 Sawzall Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8-Inch stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics. Note that product package does not include blade. Blades are sold separately.         ...
Post a Comment
Read more

Milwaukee 48-00-1303 Sawzall Blade Wood 5 Teeth per Inch 12-Inch Length, 5 Pieces in 1 Pack

The product is easy to use The product is durable The product is manufactured in Switzerland 5 TPI, 12 in. Length, High Carbon Steel Construction 1/2 in. Universal Tang fits all Sawzalls Milwaukee's Pruning Blades are made of high carbon steel for flexibility. The deep gulleted teeth are fleam ground for aggressive cutting action in green wood. Sold in packs of 5.                                       By Larry Loo Before purchasing this package of Sawzall blades, I was a little concerned that the blades might not last too long in our hands. After all, my wife and I have gone through close to a dozen hand-held pruning saws during the 20+ years we've lived on our property. Those pruning saws always cut well when new but seem to get dull very quickly. With their close set, needle-like teeth they're also difficult to sharpen - and I've sharpened regular saws using saw sets and files. Eac...
Post a Comment
Read more

Stanley Tr110 Heavy Duty Steel Stapler

Perfect For Everyday Stapling Needs Around The Home Or Office Lightweight, With Convenient Handle Lock For Safe Storage Quick-Jam Clear Mechanism Saves Time And Hassle Perfect For Everyday Stapling Needs Around The Home Or Office. Lightweight, With Convenient Handle Lock For Safe Storage. QuickJam Clear Mechanism Saves Time And Hassle. ChromePlated Steel Construction For Durability.                                      By Tech Geek Reviews Quality stapler! I use it for securing leather upholstery into wooden furniture, which can be a tough job for staple guns. I use the stanley heavy duty staplesStanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000 It does everything you want a stapler to do: -No jams in the stapler (could be the staples too, I recommend the above ones which makes a well matched pair) -A little tricky to reload the first time, but after you get some practice, ...
Post a Comment
Read more