Skip to main content

Shop-vac 903-98 HangUp Wet/Dry Vacuum Cartridge Filter

  • High efficiency dry filter
  • Fits only Shop-Vac® HangUp® wet and dry vacuum 952-02
  • Cartridge filter
  • Genuine Shop Vac Part
  • Easy to Use
Ideal for dry pick up, the Shop-Vac cartridge filter fits a 5-gallon tank, and is specifically designed for the Hang Up wet/dry vacuum. Its high airflow keeps the debris inside the tank, while filtering the exhaust air. This black filter can be lightly washed, but must be air dried prior to re-installation on the ball-float cage.

                                   Image result for amazon buy now
Image result for customer review
By E. Corr
I'm using this filter in my wall hung shop vac.Because this vac is used to collect sawdust from my small band saw and belt sander, it clogs fairly quickly, but the system works well and is very compact. Over the past eight years or so that the vac has been used this way, I found that by using a piece of 1/4-20 allthread, a few nuts and washers I could fit two filters together into my shop vacuum. This provided a 100% increase in filtering and lets me extend the time between service cleaning the vacuum tank and filters. I order the filter four at a time which gets me free shipping from Amazon, so this works out to be a pretty good deal. Four filters will last me three years or more depending on use.

By Wilson Lee
I use this filter with all my dry vacuuming. I use it with a filter bag for drywall and orbital sander dust. Otherwise, it would clog more easily than I have patience for. If it gets clogged when vacuuming coarser material, you can just take it out and knock/scrape the debris off. When I use only the foam sleeve, fine dust gets blown into the air and settles on the stuff in my garage.

Product descriptions on amazon.com can be a bit sparse sometimes, but it was fairly easy to find the filter I wanted because the product number matches the one on the ShopVac website. It would have given me some peace of mind if either amazon.com or ShopVac identified this filter as "Type AA", which one would assume was the model number based on its prominence on the packaging.

By Gregory Bequette
The filter that came with the vacuum lasted for years, even though I routinely beat it against the garage wall to clean it. This one looks like it is also well built. The first filter that I ordered was too large, even though it was supposed to fit most 5 gallon and larger vacuums, and mine is 5 gallon. I recommend checking the Shop Vac web site to make sure that you get the right size the first time.

By Mark
I noticed that my Shop Vac Hang-Up Pro had stopped sucking very effectively. After cleaning out the hose that my teenage son used to suck up paper towels, I also noticed that the filter was FILTHY! I don't think I had changed it since I've owned this Shop Vac, so I came to Amazon and found this filter on the cheap. With Prime shipping, it was here in 2 days.

By Paul D. Merritt
I buy these replacement filter canisters for my shop vac wall mounted vacuum from other sources and paid alot more per filter........no I'm buying then only here from AMAZON! They trap alot of fine dust for me as I use them for cleaning out the ash from my cold pellet stove. I do this every week, and knock the dust out of the filter by hand for quite a while before I have to get a new one, but every so often you just have to get one, so AMAZON it is!!!
Paul

By Rockinroller
This really SUCKS!!! Well, I mean the vacuum in which this is installed sucks, and this filter does its job of filtering the particles that are ingested by the vac. I've even washed these out, let them dry and have reused them, after the filter got caked with drywall dust (the worst!). Just wash thoroughly using a wire brush to "comb" the slats of the filter, then let dry in the sun for a few days (Arizona: 1 day).

By Notsomadmaxine
This filter is very well-made, and a great replacement for the original one I've had for years. I take it outside and tap it after use to keep it clear and improve suction. Fits perfectly in my "Shop vac HangUp" 3.5gal vac that I got from Sears.

By FA Cabs
Properly maintained, these cartridge filters last a while. The quality of the cartridge filter is pretty good and replacing the filter is a simple procedure. I clean the filter regularly, with the help of an air compressor, assuring longevity as well as drawing power. I get a bit frustrated when a replacement is needed. Shop-Vac lists so many diverse filters. Relying on Amazon’s info (whether the filter fits a particular Shop-Vac contraption) is a bit dicey. Each and every time, the online product catalog (on the Shop-Vac site) needs to be consulted to ascertain that the right one (by product number) is ordered.

By Bob Rice
It fits my small Shop-vac (QAL18A) I use all the time, and does a great job filtering just about any kind of dust. However, it is not a HEPA filter,
which is not necessary for general vacuuming, but would be nice. I'm just happy to be able to buy these, and in fact bought three.

By K. J. Kalin
My local Walmart does not carry these filters anymore. I bought a slightly different one that said it fit most of the 5-gallon Shop-Vacs but didn't specifically mention the Brute, so I called Shop-Vac to make sure it was the right filter. It wasn't. I could have gotten the filter from them, but they recommended Amazon as being cheaper, which it is. It's nice that Shop-Vac was so helpful and Amazon carries them.

                                          

Comments

Popular posts from this blog

Milwaukee 6519-31 12 Amp Sawzall Reciprocating Saw Kit

Powerful 12-amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials 1-1/8-inch stroke length provides maximum cutting speed Gear protecting clutch extends gear and motor life by absorbing high-impact forces caused by blade lock-ups Counter-weighted mechanism provides reduced vibration for smoother operation QUIK-LOK blade clamp provides fast, tool-free blade changes The 6519-31 Sawzall Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8-Inch stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics. Note that product package does not include blade. Blades are sold separately.         ...

Milwaukee 48-00-1303 Sawzall Blade Wood 5 Teeth per Inch 12-Inch Length, 5 Pieces in 1 Pack

The product is easy to use The product is durable The product is manufactured in Switzerland 5 TPI, 12 in. Length, High Carbon Steel Construction 1/2 in. Universal Tang fits all Sawzalls Milwaukee's Pruning Blades are made of high carbon steel for flexibility. The deep gulleted teeth are fleam ground for aggressive cutting action in green wood. Sold in packs of 5.                                       By Larry Loo Before purchasing this package of Sawzall blades, I was a little concerned that the blades might not last too long in our hands. After all, my wife and I have gone through close to a dozen hand-held pruning saws during the 20+ years we've lived on our property. Those pruning saws always cut well when new but seem to get dull very quickly. With their close set, needle-like teeth they're also difficult to sharpen - and I've sharpened regular saws using saw sets and files. Eac...

Stanley Tr110 Heavy Duty Steel Stapler

Perfect For Everyday Stapling Needs Around The Home Or Office Lightweight, With Convenient Handle Lock For Safe Storage Quick-Jam Clear Mechanism Saves Time And Hassle Perfect For Everyday Stapling Needs Around The Home Or Office. Lightweight, With Convenient Handle Lock For Safe Storage. QuickJam Clear Mechanism Saves Time And Hassle. ChromePlated Steel Construction For Durability.                                      By Tech Geek Reviews Quality stapler! I use it for securing leather upholstery into wooden furniture, which can be a tough job for staple guns. I use the stanley heavy duty staplesStanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000 It does everything you want a stapler to do: -No jams in the stapler (could be the staples too, I recommend the above ones which makes a well matched pair) -A little tricky to reload the first time, but after you get some practice, ...