Bostitch BTFP72333 Industrial 1/4-Inch Series Swivel Plug with 1/4-Inch NPT Male Thread

• Swivel design minimizes hose twisting for improved control
• Corrosion resistant steel for long
• Pre-applied thread connections

The Bo stitch BTFP72333 Industrial 1/4" Series Swivel Plug - 1/4" NPT Male Thread features a swivel design which minimizes hose twisting for improved control. It is designed with corrosion resistant steel for long. It also offers pre-applied thread sealant for airtight connections which this eliminates the need for thread sealant tape.

                                  

By Toro1966

This worked great and exactly as described. The teflon coated threaded fitting meant that I didn't have to waste time trying to use teflon tape. I simple screwed it on the tool, tightened it up and it was good to go. The swivel worked fantastically. It did not leak any air at any angle which is common to a lot of these fittings I have used over the years. I would definitely recommend to others and I intend to pick up some extras to have as spares

By Radio Guy

Some of the other brands out there don't hold up as well as these. I have never had one of these Bostitch brand to leak yet. seems very good quality.

By Chad R.

I use this with 1/4" NPT 360 Degree Swivel Connect Air Compressor Tool Swivel Connector Coupler and Campbell Hausfeld Commercial CL153900AV Rivet Gun and it works great! No leaks after many hours of use.

By Diver165

must have for air tool users. It eases the strain on the air coupling and best of all it doesn't leak. I use them on all of my nailers and tool that I use with my large diameter air hose. It just makes it easier to handle them (especially the big framing nailers).

.

By mike

This is an airtight unit that makes using the impact and blow gun tools much easier to use. Really impressed with the construction and already applied sealant on the brass threads. Simply screw in and move on.

By T.M. Constructors

First I'm a professional everyday contractor so these get used and abused.
I purchased, recieved and installed these on two of my coil roof guns, one finish nail gun and one framing nail gun. and i love them so far.
Only two of the four air guns are bostich brand

By Timm Martin

Works great with my palm nailer, allowing the air hose to move around more freely. I have to remove this fitting every time I use the nailer so I can add oil to the nailer, but a little strip of plumbing tape, and the seal is good as new.

By Asbestos

Absolutely love this thing. Snap-on wanted $15 for one. Threw this on my 1/4 air ratchet, and all the benifits of a whip with out the annoyances of disconnecting the whip. Even accidentally dropped it on the fitting from a rack 5 feet up. Still going strong no leaks.

By Edward H. Wilkie

I've put these on every air tool I own, and I have a bunch. They make it easy to maneuver the tool into difficult areas where the air hose would normally get hung up or prevent access. Over time, they may start to leak a bit at the swivel, but a thin coat of 30 weight oil on the swivel will fix that.

By zzTrigger

I don't know how I got along without these swivel connectors. Even though it's only a small amount of movement, it makes the tool feel so much lighter than with a regular static connector. This Bostitch connector in particular was purchased to be used with BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing. I have used it to side a new 10x10 shed, as well as a 22x22 two story addition on my house, and I have had no issues with leaking so far.

I don't baby my tools; this connector hit the concrete floor from a 10 foot ladder and it kept on kicking with no leaks. It still feels solid when I connect it to the hose and I sometimes hang the tool using the hose while I grab something else and haven't had issues.

If you are still using regular static connectors on your air tools I highly recommend this product.