Skip to main content

Marathon 4.10/3.50-4' Replacement Inner Tube

  • Replacement Tube for 10" Outside Diameter Tire
  • 4 ply rubber
  • Fix flats without having to buy a new tire.
  • See Tire Side Wall for Tire Load Capacity
  • Maximum inflation is 30 PSI. Inflate with manual pump only. Not for highway use.
4.10/3.50 - 4" replacement inner tube,10" outside diameter tire, 4-ply rubber tube, 45 degree angled valve stem, inflate with manual pump only, maximum inflation is 30 PSI, weighs 1 lb, not for highway use.

                                  Image result for amazon buy now
Image result for customer review
By Donovan Santos
Perfect replacement for my dolly tires. although it is a pain changing them unless you have tire irons, after a couple blisters, cuts and bruises I managed to get these fixed. The tubes work great. And there is a video on Youtube that gives you tips to replacing these.

By tom myrs
I bought this tube for my generator. Fits perfect. This tube has a 90 degree valve on it facing "out"
Be very careful buying tubes like this because most are angled but they angle towards the inside (middle) of the tire and won't fit because tube gets twisted.

By Dwight Jones
After about ten years, the tire on my two wheeler popped. This tube fit my dolly and it holds air. So far so good after a few months of occasional use. Just make sure you get the right tube to fit your equipment. My other dolly tire went flat last week, so I will be buying another.

By Consumer man
ended up with two orders of two, bought two on my Iphone and then it kept saying two were in my cart so i figured the iphone didnt buy it, although it showed an order,, confusion got to me so I bought another two,,, it is fine, have a harbor freight cheapo hand truck so I am sure I will go through tubes,,

By DIY
The inner tube was an identical perfect replacement for a tube in my hand truck tire that after 18 years had the joint between the stem and the tube deteriorate until it wouldn't hold air. The Marathon tube appears to be high quality and because it was identical in its design, fit in the tire and on the rim with perfect alignment (the stem). The price was competitive. Delivery was fast.

By Roy Fox
Worked great to swap in for my cargo wagon wheel which had hand truck tires (American Flyer style) - the nozzle is very strong as it took some stress when I popped the tire back on the rim with no issue pumping it up...

By Jeffery L. Richardson
This is a simple product with a simple review. The tubes are of good quality and did not leak upon installation. Be careful when
installing with tools on small rims, as you can pinch a hole with your tool. That being said, is why some people think the tubes have holes in them, though the tubes are new. They were just clumsy with there tools, and pinched a hole. You should have success if
you install properly. Good luck!

By John DeMeo
The tires that came with my Harper 600 lb. hand truck were junk. I put this Marathon inner tube on one of the tires. A week later the tire is still fully inflated. Couldn't ask for me. This is an inexpensive solution. I'm very happy with my purchase.

By Amazon Customer
Great replacement for my yard cart. Beware that the valve stem is not straight but has a 45 degree bend. This made it a little tricky to fit the hubs on my cart as they were designed for straight stem tubes.

By Amazon Reviewer
I bought these for my soft tire dolly that did not have tubes. As I used the dolly infrequently, after a couple of weeks of non-use, one or both of the tires would be flat and very difficult to put air in as they would not seal. Since I put these in, they work perfect! A little hard to get the tubes into the tire setup, but, well worth the effort. Be prepared to get your hands dirty installing them.

                                             

Comments

Post a Comment

Popular posts from this blog

Milwaukee 6519-31 12 Amp Sawzall Reciprocating Saw Kit

Powerful 12-amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials 1-1/8-inch stroke length provides maximum cutting speed Gear protecting clutch extends gear and motor life by absorbing high-impact forces caused by blade lock-ups Counter-weighted mechanism provides reduced vibration for smoother operation QUIK-LOK blade clamp provides fast, tool-free blade changes The 6519-31 Sawzall Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8-Inch stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics. Note that product package does not include blade. Blades are sold separately.         ...
Post a Comment
Read more

Stanley Tr110 Heavy Duty Steel Stapler

Perfect For Everyday Stapling Needs Around The Home Or Office Lightweight, With Convenient Handle Lock For Safe Storage Quick-Jam Clear Mechanism Saves Time And Hassle Perfect For Everyday Stapling Needs Around The Home Or Office. Lightweight, With Convenient Handle Lock For Safe Storage. QuickJam Clear Mechanism Saves Time And Hassle. ChromePlated Steel Construction For Durability.                                      By Tech Geek Reviews Quality stapler! I use it for securing leather upholstery into wooden furniture, which can be a tough job for staple guns. I use the stanley heavy duty staplesStanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000 It does everything you want a stapler to do: -No jams in the stapler (could be the staples too, I recommend the above ones which makes a well matched pair) -A little tricky to reload the first time, but after you get some practice, ...
Post a Comment
Read more

TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece

Instant impact force loosens rusted or frozen screws without damaging them Forward and reverse drive direction Drives included screwdriver bits or any 3/8 in. drive impact socket Comfortable handle with non-slip knurled grip Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements Loosen corroded brake caliper screws, rusted body panel fasteners or frozen bolts with ease using the TEKTON 3/8 in. Drive Reversible Manual Impact Driver Set. This unique tool converts a hammer strike into a powerful, high-torque force, freeing even the most stubborn fasteners. It's compact and lightweight and doesn't need any air or power source, so you can use it in the garage, or take it on the road or out in the salvage yard to quickly remove parts long exposed to the elements. Reversible drive is great for loosening left-hand thread fasteners. Extremely versatile, it can drive the included hex shank screwdriver bits, other universal 5/16 in. hex sha...
Post a Comment
Read more