- High Visibility Yellow Makes The Hammer Easy To Locate On The Jobsite
- Fiberglass Core Adds Strength And Durability In The Handle, Reduces Vibrations And Provides The "Feel Of Wood"
- Exclusive Rim Temper Reduces Incidences Of Chipping And Spalling
High Visibility Yellow Makes The Hammer Easy To Locate On The Jobsite. Fiberglass Core Adds Strength And Durability In The Handle, Reduces Vibrations And Provides The Feel Of Wood. Exclusive Rim Temper Reduces Incidences Of Chipping And Spalling. Ergonomic Comfort Grip Features A Ribbed Surface And Flared End To Provide A Firm Grip And Help Reduce Slippage.
By I Needs a Name
This hammer is a decent hammer there is nothing wrong with it. Have worked in construction for my whole life. If you want a durable hammer, that has no frills this will pretty much do the job.
I would choose a stanley fat max,Vaughn, or Estwing, but this is a very good homeowner hammer. Its handle is a little short so the leverage is not that high. However, that is personal preference.
I would choose a stanley fat max,Vaughn, or Estwing, but this is a very good homeowner hammer. Its handle is a little short so the leverage is not that high. However, that is personal preference.
By Water Monkey
I love this hammer. When I am framing and need the weight behind it, this hammer does a great job. At 20oz. I can get enough power behind each swing to really drive the nails. As with most other Stanley hammers, they are built to last. Unless something catastrophic happens to the hammer, you'll be owning this one for many years.
While this is a great hammer, it might be too big for the average homeowner looking for a hammer for household jobs. Also, the flatter rip claw is made more for prying boards apart. Most homeowners will want the claw for pulling nails, and permanently marring up their walls; I would suggest the Stanley 16oz curve claw hammer.
While this is a great hammer, it might be too big for the average homeowner looking for a hammer for household jobs. Also, the flatter rip claw is made more for prying boards apart. Most homeowners will want the claw for pulling nails, and permanently marring up their walls; I would suggest the Stanley 16oz curve claw hammer.
By D. Barber
I ordered this hammer just two days ago, and just now received it. Amazon Prime, you know.
I had a favorite old hammer for many, many years. One day, I finally managed to break it.
Here at Amazon I found what looked like a good replacement, this Stanley 20-Oz. rip claw hammer.
My main concert was that it might not be a "full-sized" hammer. I have one of those small hammers
ideal for light jobs like driving brad nails into the wall, for hanging pictures. But, there are times when you need
a hammer for the bigger jobs. Amazon lists this as almost 13 inches long, which seemed to me to be too small.
I measured the hammer and it's 13 1/8 inches long. Sure enough, it's a full-sized hammer, and quite hefty.
Maybe too hefty. The hammer feels a bit top-heavy and when swinging it about, I feel like the hammer is swinging me.
You know, wag the dog. If your an old-time carpenter who thinks nothing of driving an 8-penny nail into a beam with
one or two good hits, this is your hammer. On the other hand, I suspect that about 90% of all users would prefer a slightly
lighter hammer. Knowing what I know now, I believe the ideal general purpose hammer is the 16-Oz version. Go with the 16-Oz
model with the curved claw and you will have the hammer that you remember from Dad's tool belt.
You may wonder if this hammer is suited to pulling nails? Yes, it is. The claw has a V-shaped gap which is about 1 3/8" long.
The wide end is about 3/8" and it tapers to a narrow point of about 1/16".
I like the finish on this hammer. Like brushed stainless steel. A finely ground look, like a stainless steel kitchen sink. I like this hammer
and will certainly keep it, but I do think the 16-Oz would have been a better choice. So, I will summarize this way:
(1) This is a full-sized hammer.
(2) For most of you, the 16-Oz. is the better choice.
I hope this was helpful.
I had a favorite old hammer for many, many years. One day, I finally managed to break it.
Here at Amazon I found what looked like a good replacement, this Stanley 20-Oz. rip claw hammer.
My main concert was that it might not be a "full-sized" hammer. I have one of those small hammers
ideal for light jobs like driving brad nails into the wall, for hanging pictures. But, there are times when you need
a hammer for the bigger jobs. Amazon lists this as almost 13 inches long, which seemed to me to be too small.
I measured the hammer and it's 13 1/8 inches long. Sure enough, it's a full-sized hammer, and quite hefty.
Maybe too hefty. The hammer feels a bit top-heavy and when swinging it about, I feel like the hammer is swinging me.
You know, wag the dog. If your an old-time carpenter who thinks nothing of driving an 8-penny nail into a beam with
one or two good hits, this is your hammer. On the other hand, I suspect that about 90% of all users would prefer a slightly
lighter hammer. Knowing what I know now, I believe the ideal general purpose hammer is the 16-Oz version. Go with the 16-Oz
model with the curved claw and you will have the hammer that you remember from Dad's tool belt.
You may wonder if this hammer is suited to pulling nails? Yes, it is. The claw has a V-shaped gap which is about 1 3/8" long.
The wide end is about 3/8" and it tapers to a narrow point of about 1/16".
I like the finish on this hammer. Like brushed stainless steel. A finely ground look, like a stainless steel kitchen sink. I like this hammer
and will certainly keep it, but I do think the 16-Oz would have been a better choice. So, I will summarize this way:
(1) This is a full-sized hammer.
(2) For most of you, the 16-Oz. is the better choice.
I hope this was helpful.
By encanto
I must admit I have fondled many hammers during my time. Whenever I visit my favorite hardware haunts, I pass by the tool crib and pick up a dozen or so to find that hammer with just the right balance, grip and finish. This Stanley is the best I've found for a price not much greater than those with hard wood handles. The cushioned grip has a slight curve at the bottom that makes it feel very secure in the hand, and the balance I found remarkable. The finish on the head and claw is evenly ground with a protective finish that makes it look really good when you first get it, although it wears off with use. The yellow fiberglas shaft looks sharp and feels strong when you strike that 10 penny. A basic tool if ever there was one, but very well done and suitable for amateur and pro alike. Thanks, Stanley, and thanks Amazon!
By C. MacPhai
This is a really nice little hammer. I'm not a huge fan of Stanley tools, but I like this one.
Of course, it's less than half the punch of a regular 16-oz hammer. But that's a plus for so many tasks. Also good for camping (tent stakes) when lighter/smaller is a plus.
Very nice rubber grip.
Actual dimensions are: 11.1" x 3.9" x 1.2"
Shop around. Mine is from Wal-Mart at under 6 buckss.
Of course, it's less than half the punch of a regular 16-oz hammer. But that's a plus for so many tasks. Also good for camping (tent stakes) when lighter/smaller is a plus.
Very nice rubber grip.
Actual dimensions are: 11.1" x 3.9" x 1.2"
Shop around. Mine is from Wal-Mart at under 6 buckss.
By Penny
Can't believe I got a 20oz hammer by Stanley for under $7. This Hammer is GREAT! I'm a certified carpenter so i know my tools. I usually go w/ the good 'ol Eastwing all-steel hammers (sometimes Vaughn hickory framers) but those are usually about $30 or so. When I saw this for $6.xx I had to get it as a leave-around hammer. One i can just leave anywhere and/or keep at home for odd stuff. The grip/handle is tacky and comfortable, although i'd like it a hair thicker. I have small hands and it feels thinner in the hand than most of my other hammers. A good 1/8 thicker wouldve been nice, especially since it's a 20oz. If it were 16 or 14, no problem. I will probably end up wrapping it with griptape to build it up. Other than that, I can't complain. A fiberglass handle 20oz rip hammer for under $7 is a STEAL!
By Michael Sullivan
As a bit of context for this review, I purchased this hammer for casual household use, not construction -- I can't personally say whether it would hold up to heavier use. I acquired the hammer to replace the one that came in the sort of unbranded "First Time Homebuyers" tool kit that one buys on sale at age 24. I eventually warped the neck on that one trying to pull nails out of an old pallet.
This hammer stood up to that particular challenge, and I've used it with no problems ever since. The fiberglass body makes it a little lighter than a traditional hammer, which doesn't seem to affect its ability to do light jobs around the house, but makes it slightly more convenient to carry up and down ladders. The body isn't slick, either -- the rubber grip is secure, and my hands don't slide when I'm hammering. It's weighted a little differently than other hammers I've used -- the center of balance is closer to the head -- but this isn't a problem.
The bright yellow shaft makes it stand out from my other hand tools. I've certainly never left this behind anywhere. It doesn't show any significant signs of wear or damage after a few months of normal use, and I expect that this hammer is going to last me for several years to come. I would definitely buy it again.
This hammer stood up to that particular challenge, and I've used it with no problems ever since. The fiberglass body makes it a little lighter than a traditional hammer, which doesn't seem to affect its ability to do light jobs around the house, but makes it slightly more convenient to carry up and down ladders. The body isn't slick, either -- the rubber grip is secure, and my hands don't slide when I'm hammering. It's weighted a little differently than other hammers I've used -- the center of balance is closer to the head -- but this isn't a problem.
The bright yellow shaft makes it stand out from my other hand tools. I've certainly never left this behind anywhere. It doesn't show any significant signs of wear or damage after a few months of normal use, and I expect that this hammer is going to last me for several years to come. I would definitely buy it again.
By Gayle G
Being an older female, I wanted a hammer that had enough weight that it would work well......but also because I am an older female, I wanted a hammer that was lighter weight than a normal carpenter's hammer......this is great. Highly recommend for do-it-yourself ladies out there who want a "smaller" grip and slightly lighter weight. Fits the Bill
By Vulpine
It’s a hammer that fits great in my hand! I don’t do a lot of hammering but I hated the wooden one I have and no one should ever use a steel hammer for very long. This hammer has a good grip. It’s a nice priced hammer for doing most any finish work. The head smooth. Over all a good buy.
By Michael M
This hammer has held up well and the fiberglass handle was light and comfortable. I have remodeled my bathroom and even took this on several jobs with me so I have put it to the test. I am very happy with this hammer as far as function and durability. When you use a hammer on the job it is nice having something lighter so you don't get wore down or get cramps. I was so pleased with this hammer I put it on my tool belt so now anytime I do a project at home or a job it is the hammer I use first.
Comments
Post a Comment