Skip to main content

Milwaukee 2656-20 M18 1/4' Hex Imp

  • M18 1/4" Hex Imp
  • The product is easy to use and easy to handle
  • The product is highly durable
M18 1/4" Hex Imp. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable.

                                    Image result for amazon buy now
Image result for customer review
By Paul Kizer
Mine arrived in new condition as shown in photo #1.

It will break loose the 14mm caliper bolts as shown in photo #2.

It won't break loose the 17mm caliper bracket bolts as shown in photo #3.
I always break the caliper bracket bolts loose with my breaker bar first and then zip the bolts the rest of the way off with the electric impact driver,

It's shorter than a 1/2 impact gun so you can get into tighter spaces.

It's great for removing under car splash sheild and underhood engine cover.

Any 5mm - 14mm bolt I can reach with this gun.. That bolt is coming off fast.

it's super speedy, three times faster than my electric or air ratchet and twice as fast as my electric drill.
review image review image review image

By Carefull shopper
Hit the locker in San Francisco in about 22 hours. Its new as far as im concerned. In a day or two it'll look used cause I wear em out and buy a new one. Impacts drive drywall screws, lags 1/4 ,3/8,1/2 easily. Also drill 1" holes in studs for romex. Bettet than a drill driver. I use 3 a day with different bits. Grabing an impact easier than changing bits. My theory is Milwaukee markets in many ways to get a one tool in your hand. After that your sold. I have 15 of there battery tools , some doubles some in 12,18,even 24 volt. Today I bought sheetmetal shears nib at flea market. Wish they would do a batyery chop saw. Other make them!!#&% hint hint.

By Mark Twain
This is now my go to drill. I am really happy with the price I paid for this. I think milwuakee drills are great and I already had the batteries and charger so it was an easy decision. Great impact.

By Gary Lewis
Have 2 2650 drivers and after 5 years +/- the switches both went bad. Looked at the cost of a switch as opposed to the cost of a new driver. This driver ( 2656 ) is less than $10 more than the cost of a switch and I don't have to take the 2650 driver apart to install the switch and I have a brand new driver.. No brainer to me. This new model (2656) is great. I was amazed the first time I used it because the speed and power are so much better that the previous model (2650 ). I'm going to be buying another one soon so I have two available to use at any one time . ( different bits ). Love this new model, well worth the money.

By Michael W.
I've had this little beast for about 1 month and have used it to build a bridge over a small creek, build a picnic table and a few other things. And I LOVE it! My only regret is that I didn't buy it sooner.

By Troy F.
Fifty six bucks for a spankin new Milwaukee impact that sells for double that at the Depot ? Cant beat that with a dish rag,

By buying guy
I bought this as a factory refurbished unit. It works great for intended use. I did break it trying to screw a large bolt into a tree where the bolt quit moving and I kept trying, maybe I burned something out. I took it to Milwaukee for warranty service. The repair guy was offended that I admitted abusing it so I am not sure what was actually broken as he would not tell me.
It has worked fine ever since and I have done a couple of week-long jobs with it. We drop it, throw it, slide it across the floor, use it in the rain and all is fine so far.
The small batteries that come with mine, not necessarily with this ad, are the 2 amp-hour batteries, and are reasonable since I have two batteries between drill and wrench and can keep swapping for a fresh charge, but I ended up buying the larger 4 amp-hr batteries from Homedepot, two for $129.
Go ahead and get the belt clip and the bit holder at the same time. Not sure why they do not come with it.

By Mike
Awesome tool. No problems here!

By DONALD E. SMITH
I have the M12 volt impact drill from Milwaukee and the M18 is a great addition to the set. It works perfectly with more than enough power to drive the longest screws and lag bolts. Much smoother and faster than my M12 too!

By Travis
Some reviews say it looks used or came broken, and they very well might have. Mine came looking new and works perfect even with heavy use in construction.

Happy customer.

                                               

Comments

Post a Comment

Popular posts from this blog

Milwaukee 6519-31 12 Amp Sawzall Reciprocating Saw Kit

Powerful 12-amp motor delivers 0-3,000 SPM for high performance cutting in a variety of materials 1-1/8-inch stroke length provides maximum cutting speed Gear protecting clutch extends gear and motor life by absorbing high-impact forces caused by blade lock-ups Counter-weighted mechanism provides reduced vibration for smoother operation QUIK-LOK blade clamp provides fast, tool-free blade changes The 6519-31 Sawzall Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8-Inch stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics. Note that product package does not include blade. Blades are sold separately.         ...
Post a Comment
Read more

Milwaukee 48-00-1303 Sawzall Blade Wood 5 Teeth per Inch 12-Inch Length, 5 Pieces in 1 Pack

The product is easy to use The product is durable The product is manufactured in Switzerland 5 TPI, 12 in. Length, High Carbon Steel Construction 1/2 in. Universal Tang fits all Sawzalls Milwaukee's Pruning Blades are made of high carbon steel for flexibility. The deep gulleted teeth are fleam ground for aggressive cutting action in green wood. Sold in packs of 5.                                       By Larry Loo Before purchasing this package of Sawzall blades, I was a little concerned that the blades might not last too long in our hands. After all, my wife and I have gone through close to a dozen hand-held pruning saws during the 20+ years we've lived on our property. Those pruning saws always cut well when new but seem to get dull very quickly. With their close set, needle-like teeth they're also difficult to sharpen - and I've sharpened regular saws using saw sets and files. Eac...
Post a Comment
Read more

Stanley Tr110 Heavy Duty Steel Stapler

Perfect For Everyday Stapling Needs Around The Home Or Office Lightweight, With Convenient Handle Lock For Safe Storage Quick-Jam Clear Mechanism Saves Time And Hassle Perfect For Everyday Stapling Needs Around The Home Or Office. Lightweight, With Convenient Handle Lock For Safe Storage. QuickJam Clear Mechanism Saves Time And Hassle. ChromePlated Steel Construction For Durability.                                      By Tech Geek Reviews Quality stapler! I use it for securing leather upholstery into wooden furniture, which can be a tough job for staple guns. I use the stanley heavy duty staplesStanley TRA704T 1/4-Inch Heavy Duty Staples, Pack of 1000 It does everything you want a stapler to do: -No jams in the stapler (could be the staples too, I recommend the above ones which makes a well matched pair) -A little tricky to reload the first time, but after you get some practice, ...
Post a Comment
Read more