Milwaukee Heavy Duty Contractors Bag 11x11x10

• Tough, water resistant 600 denier material
• Durable zipper closure
• Ideal for tool and accessory storage

11x11x10 Contractor Bag, Soft side contractor bag made of tough water resistant 600 denier material. for job site tools and accessories. Dual handle straps for easy carrying. Durable zipper closure. 11 long by 11 wide by 9''high. Features: Milwaukee has focused on a single vision: To produce the best heavy-duty electric power tools and accessories available to the professional user. Today, the Milwaukee name stands for the highest quality, durable and reliable professional tools.

                                       

By SK Wire

Nice tool bag for any medium size power tool. I am using it for my "grab and go" cordless drill with a few types of bits for all applications. I used to keep drills and bits all separately, but found that I liked having a go to bag for projects so that I didn't have to spend time assembling a kit.

I am going to try and do this with my entire set of tools and these bags are a good start for mid size tools. Very high quality compared to cheaper bags that you can find at stores.

By Zapatogrande

The tool bag overall is very handy for me. I carry a Milwaukee M12 volt right angle drill, a 12 volt charger, Milwaukee M12 Cordless Subcompact Driver and a Milwaukee M12 Fuel™ 1/4" Hex Impact Driver in it. Has enough room for all of those and a few extension bit tip holders. The fabric does not seem to be super heavy, but for the time being it does seem to do an adequate job of carrying all of the tools that have been mentioned before. I agree with the comment that it could benefit from an internal pocket or two, but other than that, the bag does what it is supposed to do and does so very well. Keeps everything in one place and is handier than having to carry everything in a hard case which would take up more room in the minivan that I use as my work vehicle.

By Chris J. Albertson

Best deal in tool bags I've seen. This lacks some of the padding (only padded on the bottom) of other bags but for some uses you don't need it.

It's taller then most too. Good for lighter weight items. I use it for battery chargers, sanding belts and disks and light weight power tool accessories.

By Thumper

When you piece-meal a 2763-20 'Red Monster' with a 48-59-1850 Milwaukee charger / 5 ah battery KIT ( along with another 5 ah on sale )---yur price IS below $400---but you don't get a CASE.....so I bought this bag just to keep everything in one place. This bag is well built, and fits the monster 2763 impact, along with 2 batteries AND 2 chargers---but WAIT !!! There's still more room for my recently bought 2603 DRILL----a whole bunch fits in the bag, but I don't necessarily think I'll carry all if I leave my house for a friends project----but I can if I want! Get rid of one or both chargers, and thar is plenty room for bits & accessories...

By Flymo Mulch

This is a pretty nice little bag, a good value for the relatively inexpensive price. The bottom is padded nicely, and the fabric is reasonably heavy - no idea how it will hold up at this point.

I have it filled with an M18 Fuel Hammer Drill, M18 Fuel 1/4 Compact Impact Driver, 2 5Ah batteries and 1 1.5Ah battery, charger, and 2 cases for drill and driver bits. All that fits pretty easily. I might like a little more room but I do like the compact overall size - it's certainly way better than the giant plastic case all that stuff comes in. Yes, it would be nice if it had internal pockets but that might put the price up over the 11 bucks it costs now.

By pierop

Perfect size for my Milwaukee 3/8" drill. The drill did not come with a case so in looking over the different options, I thought this one would be OK but was a little worried it might be too small. Turns out that the size was perfect. There is even enough room to carry drill bits and a few other things. High quality construction so it will last a long time.

By RED-DVL

This bag holds my Milwaukee 3/8" Lithium-Powered ratchet, 4 small lithium batteries for it and 2 of the larger lithium batteries. On top of that there's still room for a lot more, including sockets, extensions (you could fit a 12" extension in it), and even carry the charger in it too. There are no pockets inside, as stated by other reviewers, but they would charge you more for adding them and it's just not that important to me.

By Amazon Adam

An excellent durable bag that I use for my 2 drills and a hack-saw Milwaukee items. Yes, I absolutely LOVE Milwaukee tools and this is the best way to take them from place to place safely. The durable nylon bag is simple yet very sturdy. There is a zipper, but I don't personally use it. Sure beats those cheap plastic boxes you see at the hardware store. I enjoy the handles when it is carried too.

By Scott Rauch

Extremely durable. I keep Torin TR9020 Chain Block - 2 Ton and Fusion Z-Max Pulley (Red/Black) in it, plus 1/4" steel cable and shackles. There is no sign this thing feels overloaded or even crowded.

Huge opening is really nice.

Fantastic bag.

By Daniel Smith

I like the quality of all the Milwaukee tools I own (and I own a LOT of tools), I was given some advice 40 years ago from an old woodworker- "always buy the best tools that are available, they will pay for themselves in the years to come"- that old fellow has gone to the Shop that all "Artists" of our trade go one day- I have been building "Heirloom Quality" woodwork for 30+ years and the old guys that have helped me to learn the trade have given me a gift I will cherish as long as I'm woodworking- this wonderful tool bag is a "Must" for keeping my shop in somewhat order, it is very well constructed of high quality materials and I expect it will last for many generations of woodworkers- if you need a tool bag as good as the name that it represents, buy this one, Thanks to all who take the time to review the things we buy, and to Amazon for the wonderful service they provide